I made this table using a dark walnut slab that was 30 inches wide by 8 feet long by two inches thick and is absolutely stunning. The epoxy I used and what I use for almost all my projects, is called Ice Cast epoxy with black dye I usually use pigment to colour my epoxy but when I do black I always use dye.

When I am working with black the sanding process takes quite a bit of time because when you sand the epoxy it turns white so to get rid of those I sand the whole top to at least 2000 grit for a really nice shine. The finish I used for this project was tabletop epoxy its an awesome product that will keep your table looking new for years to come.

The process of making the stand was a total headache but it was worth it the stand is perfect and super strong. I made it using 1’x2′ rectangle steel to make all of the bars go up on an angle with a frame made with 1’x1′ square tubing covered by a 3/16 thick sheet of steel. After I finished welding I had a lot of grinding and sanding to do before I even thought of touching the paint gun.

The painting process wasn’t easy either, but with two coats of primer and three coats of paint this stand turned out stunning.

The post Dark walnut dining table with black epoxy appeared first on Pryce Designs.

I made it out of 5 14 foot long live edge slabs that I squared and then cut in half. the gluing process took about 5 days but while the glue was drying I welded those legs up with 4’x4′ steel which I think turned out cool.

To make the table a circle I used a router mounted on a piece of angle iron and made multiple passes untill I got all the way through. The finish I used for it was a semi-gloss finish the customer didn’t was a high gloss finish. For the legs, I used semi-gloss matt black paint that I painted on using my air gun.

The post 6 foot wide Dark Walnut harvest table appeared first on Pryce Designs.

The post Epoxy River Dining Table appeared first on Pryce Designs.

The post Epoxy Dining Room Table appeared first on Pryce Designs.